Panasonic CF-R1
memory
  /etc/grub.conf
  変更前
  fdisk
    disklabel
    sysid list
    fdisk(fc1)
    freebsd
    netbsd
  netbsd/fdisk
  ctrl/caps_lock
    XFree86
    RedHat
    NetBSD
    NetBSD (old style)
    FreeBSD
RedHat 9
  /etc/sysconfig
    network-scripts/ifcfg-eth0
    devices/eth1.route
    /dev/cdrom
    install
  daemons
    telnetd
    amd
    nis
  rpm
  emacs
    site-lisp
    tamago
      サーバと接続..
  fvwm2
      .Xclients-default
      デスクトップ切替
    chkfontpath
    Error -110 writing Tx
Fedore Core
  ptex
  apt
NetBSD
  Network boot
    URL
  手順
    bootptab
    exports
    /tftpboot
     inetd.conf
    binary/sets
    not configured device
  4.0
  XFree86
FreeBSD
  はじめての ports
    cvsup を入れる
    cvsup を設定
    cvsup を使う
    ports で make
  URL

hardware | software
Last Update: "2004/11/06 09:21:54 makoto"

fdisk(fc1)

as of 20041106

[makoto@fedora makoto]$ sudo fdisk /dev/hda

The number of cylinders for this disk is set to 7296.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): P

Disk /dev/hda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *         1      1274  10233373+  a5  FreeBSD
/dev/hda2          1275      5099  30720312   a9  NetBSD
Partition 2 does not end on cylinder boundary.
/dev/hda3          5100      5226   1020127+  83  Linux
/dev/hda4          5227      7296  16627275    f  Win95 Ext'd (LBA)
/dev/hda5          5227      5863   5116671   83  Linux
/dev/hda6          5864      5927    514048+  82  Linux swap

Command (m for help): 
adding new partition not used
Command (m for help): n
First cylinder (5928-7296, default 5928): 
Using default value 5928
Last cylinder or +size or +sizeM or +sizeK (5928-7296, default 7296): 
Using default value 7296

Command (m for help): P

Disk /dev/hda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *         1      1274  10233373+  a5  FreeBSD
/dev/hda2          1275      5099  30720312   a9  NetBSD
Partition 2 does not end on cylinder boundary.
/dev/hda3          5100      5226   1020127+  83  Linux
/dev/hda4          5227      7296  16627275    f  Win95 Ext'd (LBA)
/dev/hda5          5227      5863   5116671   83  Linux
/dev/hda6          5864      5927    514048+  82  Linux swap
/dev/hda7          5928      7296  10996461   83  Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
[makoto@fedora makoto]$ sudo fdisk /dev/hda
[makoto@fedora makoto]$ sudo mkfs /dev/hda7
Password:
mke2fs 1.34 (25-Jul-2003)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
65536 inodes, 262144 blocks
13107 blocks (5.00%) reserved for the super user
First data block=1
32 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Superblock backups stored on blocks: 
        8193, 24577, 40961, 57345, 73729, 204801, 221185

Writing inode tables: done                            
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 21 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
[makoto@fedora makoto]$ 
Last Update: Sat, 07 Jun 2014 22:16:17 GMT 1.66 2008/03/08